9260 vs 5160
These two grades are listed as equivalents of each other: their chemistry windows overlap and they serve the same applications. They are not always identical — check the differences below before substituting, especially in certified designs.
9260
Alloy & Engineering Steel
9260 is a silicon-manganese spring steel with about 2% silicon, giving an exceptionally high yield-to-tensile ratio and resistance to permanent set (sag). It is a mainstream coil spring steel for vehicle suspensions.
Standards: DIN 1.5028 (65Si7 family, near) · AISI 9260 · JIS SUP6 (near) · GB 60Si2Mn (near)
5160
Alloy & Engineering Steel
5160 is the classic chromium spring steel of the Americas, standard for vehicle leaf springs and agricultural blades. Its 0.60% carbon with chromium gives deep hardening, high fatigue strength and forgiving heat treatment.
Standards: DIN 1.7102 (54SiCr6 is Si-type; 5160 is Cr-type, near) · AISI 5160 · JIS SUP9 (near) · GB 60CrMnA (near)
Chemical composition compared (%)
| Element | 9260 | 5160 |
|---|---|---|
| C | 0.56–0.64 | 0.56–0.61 |
| Si | 1.80–2.20 | 0.15–0.35 |
| Mn | 0.75–1.00 | 0.75–1.00 |
| P | ≤0.035 | ≤0.035 |
| S | ≤0.040 | ≤0.040 |
| Cr | — | 0.70–0.90 |
Properties compared
| Property | 9260 | 5160 |
|---|---|---|
| Hardness (spring temper) | 40–50 HRC typical | 38–48 HRC typical |
| Tensile strength | 1300–1600 MPa (Q&T spring temper, typ.) | 1200–1500 MPa (Q&T spring temper, typ.) |
| Density | 7.85 g/cm³ | 7.85 g/cm³ |
Sourcing either grade?
Nasteel stocks both families from Shenzhen with EN 10204 3.1 mill certificates by heat number.
Ask for a quotationSee full data sheets: 9260 · 5160. Substitution decisions for certified parts stay with the design authority.