8740
Data verified8740 is chemically 8640 with a higher molybdenum floor, specified where a guaranteed minimum hardenability response is required. In practice the two grades are frequently dual-certified.
Chemical composition
| Element | Content (%) |
|---|---|
| C | 0.38–0.43 |
| Si | 0.15–0.35 |
| Mn | 0.75–1.00 |
| P | ≤0.035 |
| S | ≤0.040 |
| Cr | 0.40–0.60 |
| Ni | 0.40–0.70 |
| Mo | 0.20–0.30 |
Weight percent, per the governing standard ranges. Actual values per heat are on the mill certificate.
Properties
| Hardness (Q&T) | 30–42 HRC typical |
| Tensile strength | 950–1200 MPa (Q&T, typ.) |
| Density | 7.85 g/cm³ |
Heat treatment
Normalize 870 °C; quench 855 °C oil; temper 500–650 °C.
Equivalent grades
| Standard | Designation |
|---|---|
| aisi | 8740 |
Compare side by side: 8740 vs 8640
Equivalents overlap in chemistry and use but are not always identical — see our equivalents guide before substituting in certified designs.
Applications & Processing
Applications: Gears, shafts, aircraft and high-duty machinery parts.
Processing: As 8640; the extra Mo improves temper resistance during long holds.
Need 8740 from stock?
Steel.Wiki is sponsored by Shenzhen NewAsia Special Steel (Nasteel), a special-steel stockholder in Shenzhen stocking mold, tool and alloy steels with EN 10204 3.1 certification.
Ask for a quotationVisit NasteelSource: SAE J404 published ranges · Last updated 2026-11-03. Data is indicative — verify critical values against the governing standard and mill certificate before use.